# This is a BitKeeper generated patch for the following project: # Project Name: Linux kernel tree # This patch format is intended for GNU patch command version 2.5 or higher. # This patch includes the following deltas: # ChangeSet 1.757.13.4 -> 1.757.13.5 # drivers/char/agp/agpgart_be.c 1.41.1.4 -> 1.41.1.5 # # The following is the BitKeeper ChangeSet Log # -------------------------------------------- # 02/10/29 bjorn_helgaas@hp.com 1.757.13.5 # Factor out collecting status of all AGP devices. # -------------------------------------------- # diff -Nru a/drivers/char/agp/agpgart_be.c b/drivers/char/agp/agpgart_be.c --- a/drivers/char/agp/agpgart_be.c Wed Oct 8 09:08:02 2003 +++ b/drivers/char/agp/agpgart_be.c Wed Oct 8 09:08:02 2003 @@ -452,6 +452,68 @@ /* Generic Agp routines - Start */ +static u32 agp_collect_device_status(u32 mode, u32 command) +{ + struct pci_dev *device; + u8 agp; + u32 scratch; + + pci_for_each_dev(device) { + agp = pci_find_capability(device, PCI_CAP_ID_AGP); + if (!agp) + continue; + + /* + * Ok, here we have a AGP device. Disable impossible + * settings, and adjust the readqueue to the minimum. + */ + pci_read_config_dword(device, agp + 4, &scratch); + + /* adjust RQ depth */ + command = + ((command & ~0xff000000) | + min_t(u32, (mode & 0xff000000), + min_t(u32, (command & 0xff000000), + (scratch & 0xff000000)))); + + /* disable SBA if it's not supported */ + if (!((command & 0x00000200) && + (scratch & 0x00000200) && + (mode & 0x00000200))) + command &= ~0x00000200; + + /* disable FW if it's not supported */ + if (!((command & 0x00000010) && + (scratch & 0x00000010) && + (mode & 0x00000010))) + command &= ~0x00000010; + + if (!((command & 4) && + (scratch & 4) && + (mode & 4))) + command &= ~0x00000004; + + if (!((command & 2) && + (scratch & 2) && + (mode & 2))) + command &= ~0x00000002; + + if (!((command & 1) && + (scratch & 1) && + (mode & 1))) + command &= ~0x00000001; + } + + if (command & 4) + command &= ~3; /* 4X */ + if (command & 2) + command &= ~5; /* 2X (8X for AGP3.0) */ + if (command & 1) + command &= ~6; /* 1X (4X for AGP3.0) */ + + return command; +} + static void agp_device_command(u32 command, int agp_v3) { struct pci_dev *device; @@ -474,90 +536,19 @@ static void agp_generic_agp_enable(u32 mode) { - struct pci_dev *device = NULL; - u32 command, scratch; - u8 cap_ptr; + u32 command; pci_read_config_dword(agp_bridge.dev, agp_bridge.capndx + 4, &command); - /* - * PASS1: go throu all devices that claim to be - * AGP devices and collect their data. - */ - - - pci_for_each_dev(device) { - cap_ptr = pci_find_capability(device, PCI_CAP_ID_AGP); - if (cap_ptr != 0x00) { - /* - * Ok, here we have a AGP device. Disable impossible - * settings, and adjust the readqueue to the minimum. - */ - - pci_read_config_dword(device, cap_ptr + 4, &scratch); - - /* adjust RQ depth */ - command = - ((command & ~0xff000000) | - min_t(u32, (mode & 0xff000000), - min_t(u32, (command & 0xff000000), - (scratch & 0xff000000)))); - - /* disable SBA if it's not supported */ - if (!((command & 0x00000200) && - (scratch & 0x00000200) && - (mode & 0x00000200))) - command &= ~0x00000200; - - /* disable FW if it's not supported */ - if (!((command & 0x00000010) && - (scratch & 0x00000010) && - (mode & 0x00000010))) - command &= ~0x00000010; - - if (!((command & 4) && - (scratch & 4) && - (mode & 4))) - command &= ~0x00000004; - - if (!((command & 2) && - (scratch & 2) && - (mode & 2))) - command &= ~0x00000002; - - if (!((command & 1) && - (scratch & 1) && - (mode & 1))) - command &= ~0x00000001; - } - } - /* - * PASS2: Figure out the 4X/2X/1X setting and enable the - * target (our motherboard chipset). - */ - - if (command & 4) { - command &= ~3; /* 4X */ - } - if (command & 2) { - command &= ~5; /* 2X */ - } - if (command & 1) { - command &= ~6; /* 1X */ - } + command = agp_collect_device_status(mode, command); command |= 0x00000100; pci_write_config_dword(agp_bridge.dev, agp_bridge.capndx + 8, command); - /* - * PASS3: Go throu all AGP devices and update the - * command registers. - */ - agp_device_command(command, 0); } @@ -3698,7 +3689,6 @@ struct pci_dev *device = NULL; u32 command, scratch; u8 cap_ptr; - u8 agp_v3; u8 v3_devs=0; /* FIXME: If 'mode' is x1/x2/x4 should we call the AGPv2 routines directly ? @@ -3733,64 +3723,11 @@ pci_read_config_dword(agp_bridge.dev, agp_bridge.capndx + 4, &command); - /* - * PASS2: go through all devices that claim to be - * AGP devices and collect their data. - */ - - pci_for_each_dev(device) { - cap_ptr = pci_find_capability(device, PCI_CAP_ID_AGP); - if (cap_ptr != 0x00) { - /* - * Ok, here we have a AGP device. Disable impossible - * settings, and adjust the readqueue to the minimum. - */ - - pci_read_config_dword(device, cap_ptr + 4, &scratch); - agp_v3 = (scratch & (1<<3) ) >>3; - - /* adjust RQ depth */ - command = - ((command & ~0xff000000) | - min_t(u32, (mode & 0xff000000), - min_t(u32, (command & 0xff000000), - (scratch & 0xff000000)))); - - /* disable SBA if it's not supported */ - if (!((command & 0x200) && (scratch & 0x200) && (mode & 0x200))) - command &= ~0x200; - - /* disable FW if it's not supported */ - if (!((command & 0x10) && (scratch & 0x10) && (mode & 0x10))) - command &= ~0x10; - - if (!((command & 2) && (scratch & 2) && (mode & 2))) - command &= ~2; /* 8x */ - - if (!((command & 1) && (scratch & 1) && (mode & 1))) - command &= ~1; /* 4x */ - } - } - /* - * PASS3: Figure out the 8X/4X setting and enable the - * target (our motherboard chipset). - */ - - if (command & 2) - command &= ~5; /* 8X */ - - if (command & 1) - command &= ~6; /* 4X */ - + command = agp_collect_device_status(mode, command); command |= 0x100; pci_write_config_dword(agp_bridge.dev, agp_bridge.capndx + 8, command); - /* - * PASS4: Go through all AGP devices and update the - * command registers. - */ - agp_device_command(command, 1); } @@ -4498,88 +4435,21 @@ static void serverworks_agp_enable(u32 mode) { - struct pci_dev *device = NULL; - u32 command, scratch, cap_id; - u8 cap_ptr; + u32 command; pci_read_config_dword(serverworks_private.svrwrks_dev, agp_bridge.capndx + 4, &command); - /* - * PASS1: go throu all devices that claim to be - * AGP devices and collect their data. - */ - - - pci_for_each_dev(device) { - cap_ptr = pci_find_capability(device, PCI_CAP_ID_AGP); - if (cap_ptr != 0x00) { - /* - * Ok, here we have a AGP device. Disable impossible - * settings, and adjust the readqueue to the minimum. - */ - - pci_read_config_dword(device, cap_ptr + 4, &scratch); - - /* adjust RQ depth */ - command = - ((command & ~0xff000000) | - min_t(u32, (mode & 0xff000000), - min_t(u32, (command & 0xff000000), - (scratch & 0xff000000)))); - - /* disable SBA if it's not supported */ - if (!((command & 0x00000200) && - (scratch & 0x00000200) && - (mode & 0x00000200))) - command &= ~0x00000200; - - /* disable FW */ - command &= ~0x00000010; - - command &= ~0x00000008; + command = agp_collect_device_status(mode, command); - if (!((command & 4) && - (scratch & 4) && - (mode & 4))) - command &= ~0x00000004; - - if (!((command & 2) && - (scratch & 2) && - (mode & 2))) - command &= ~0x00000002; - - if (!((command & 1) && - (scratch & 1) && - (mode & 1))) - command &= ~0x00000001; - } - } - /* - * PASS2: Figure out the 4X/2X/1X setting and enable the - * target (our motherboard chipset). - */ - - if (command & 4) { - command &= ~3; /* 4X */ - } - if (command & 2) { - command &= ~5; /* 2X */ - } - if (command & 1) { - command &= ~6; /* 1X */ - } + command &= ~0x00000010; /* disable FW */ + command &= ~0x00000008; command |= 0x00000100; pci_write_config_dword(serverworks_private.svrwrks_dev, agp_bridge.capndx + 8, command); - - /* - * PASS3: Go throu all AGP devices and update the - * command registers. - */ agp_device_command(command, 0); }